🚗 How to Fit Number Plates: A Step-by-Step Guide

At PlateLuxe, we believe that a well-fitted number plate not only enhances your vehicle's appearance but also ensures compliance with UK road regulations. Whether you're upgrading to a sleek 3D Gel plate or a classic standard plate, here's a comprehensive guide to fitting your number plates securely and legally.

---

🔧 Tools & Materials You'll Need

• Screwdriver or electric drill (if using screws)

• Screws (preferably stainless steel)

• Screw caps (colour-matched to your vehicle)

• Double-sided adhesive pads (for adhesive fitting)

• Spirit level (for alignment)

• Cleaning cloth and soapy water

• Masking tape (optional, for drilling)

  🧼 Step 1: Clean the Mounting Area

  Before attaching your new number plate, ensure the surface is clean and dry:

  • Use soapy water and a cloth to remove any dirt, dust, or old adhesive residue.

  • Dry the area thoroughly to ensure optimal adhesion.

  ---

  🛠️ Step 2: Choose Your Fixing Method

  Option 1: Adhesive Pads (No-Drill Method)

  Ideal for 3D Gel and 4D Laser Cut plates, this method offers a clean and secure fit:

  1. Apply strong double-sided adhesive pads to the back of the number plate.

  2. Use a hairdryer to warm the adhesive slightly, enhancing its bonding strength.

  3. Position the plate on the vehicle, ensuring it's level using a spirit level.

  4. Press firmly for 10–15 seconds to ensure a strong bond.

  5. Allow the adhesive to set for a few hours before driving.

  Note: Ensure the surface is clean and dry to prevent peeling.

  Option 2: Screws & Caps (Drill Method)

  Suitable for standard plates and when a more permanent fixture is desired:

  1. Align the new number plate with the mounting holes on your vehicle.

  2. Mark the drilling points on the plate using a pencil or masking tape.

  3. Drill holes carefully, preferably from the back of the plate to avoid damaging the front. Use an acrylic drill bit and a low-speed setting.

  4. Insert screws through the plate into the vehicle's mounting holes.

  5. Tighten the screws securely, but avoid over-tightening to prevent cracking.

  6. Place screw caps over the screws for a neat finish.

  Tip: Use masking tape over the drilling points to prevent the drill bit from slipping.

  ---

  ⚠️ Important Considerations

  • Legal Compliance: Ensure your number plates conform to UK regulations, including font, size, and spacing. Non-compliant plates can lead to fines up to £1,000.

  • Avoid Drilling Through Characters: Never drill through or near the 3D or 4D digits, as this can damage the characters and void your warranty.

  • Proper Alignment: Always use a spirit level to ensure the plate is straight before securing it.

  ---

  🧼 Step 3: Final Touches

  After fitting your number plate:

  • Clean the surface to remove any fingerprints or smudges.

  • Check the plate's security by gently tugging on it.

  • Ensure the plate is clearly visible and not obstructed by dirt or debris.

  ---

  🛒 Why Choose PlateLuxe?

  At PlateLuxe, we offer a wide range of high-quality, road-legal number plates tailored to your vehicle's specifications. Our plates are crafted to meet UK standards, ensuring both style and compliance.